Видео

Really wish u would SLOW down and show a better pic can’t follow along with u been trying to get my yds to work for weeks now

Thanks for the video. I've got my own Boston whaler 13, and I'm planning to upgrade mine as well, the old wire guided steering basically disintegrated before I got her.

hello every one, could we just use and instant putty filler??

Hello good! how are you? My name is Alex Goldenstein! I am contacted by NIVIKO. I was watching some of your videos on Amazon where you tell your feelings about the product. We sell headphones and smartwatches with our brand. We would love if we could put something together and work on it. We are a company from Argentina, at a time of expansion in the United States we are starting on Amazon and we would like other customers to see your experience. Are you interested?

Hello good! how are you? My name is Alex Goldenstein! I am contacted by NIVIKO. I was watching some of your videos on Amazon where you tell your feelings about the product. We sell headphones and smartwatches with our brand. We would love if we could put something together and work on it. We are a company from Argentina, at a time of expansion in the United States we are starting on Amazon and we would like other customers to see your experience. Are you interested?

Thanks mate, tape was smart 😅

This is a helpful vidz as far I'm concerned facing this issue as we speak. Thank you very much Mr Jo DIY. Libs from Singapore....

Not working on mine & I've lost keys 😢

I found the two wires that controlled the electromagnet on mine opened up the safe, drilled a hole in the back of the safe, run a wire underneath my desk hooked up a toggle switch, put the panel and all back on the door and that is how I open my safe nowunder the desk secret switch running off at 9 V battery

YOU GOT TO BE BLOODY KIDDING ME!.. I JUST BOUGHT ONE

Thanks!

Thank you! I after 3 hrs of videos, yours actually showed me exactly what I needed.

I watched your video and put a unit together. When I try it I get a spark and doesn't look like enough power. Using a Riding mower battery 12VDC with CCA of 135 A. Then placed 2 similar batteries both 12VDC and CCA 135 A. Still not enough to cause a weld. What size batteries should I be using. (Cost conscious).. What would be the minimum size, CCA, to cause a weld. Also, can you provide, or show, the actual wiring.. Thank you

Hi Jose, THANK YOU, THANK YOU, THANK YOU very much for yr video. I started by banging the safe with a hammer for 8 or 10 times and gave up. While wondering what else i cld do, i decided to give it another try. AND ...voilá, it worked. You have to catch the exact timing...and have a set of fresh batteries 😂😂😂 Thank you again mate! People like u restore my faith in humanity.

Nice editing and videography. Audio within spec.

What's the correct fuel oil mix

if its set in a concrete floor it will only open during an 6.2 earthquake 😁

Jose, you are a life saver and a safe saver. I had looked on RUclips shortly after the keypad on my Winchester safe quit working about two years ago. I didn't find anything that would help. Just recently, I looked again and found your video. On your recommendation, I went directly to eBay and purchased one of the 5715SC keypads. It arrived today, June 18, 2024 and I was beside myself trying to get it installed. In a word, Perfect. Thank you, Jose!!

Can you use this to remove tight screws as well?

gday mate that is an invaluable tool to have i couldnt even get a manual for my 2021 f40 here in aus so a fella in canada sent me one and i printed it of took some time but its genuine we cant get anything like this here all to do with dealer money ,so if you have a problem take it to your dealer and get stung they wont even let you fit your new motor has to be done by a dealer at a cost . Im a do it yourselfer so my dealer will never see this engine again as i say to others it is a four stroke engine like your car only it runs on water not bitumen regular maintenance and it will run forever , a lot of guys are scared to do any maintenance themselves , well for me in the first week i had it i had anodes out , thermo out , plugs out , leg off , oil drained and refilled , impelleor off and tested with aftermarket ones how hard can it be , if i stuff something up ill fix it up plenty of your tube videos to help you and its the same motor since 2013 they show you how to clean injectors change filters in the vst tank and pumps , your looking at around 250 au for 20 hour service some bigger engines are of the scale anyway good video on setup of the diagnostic kit .

Better than tech channels

Use a bit of petroleum gelly (vaso) to help stick the springs in place

The rack and mask part , How long di leave thm on the rack before i put them in the oven?

Thank you so much. I used my elbow instead of my fist and it came open easily. One happy daughter, now has her Christmas money back, without wrecking her safe.

Brother great content. can I send you some product for reviews? if you like it you can make contents/

I learned something. Thanks for sharing

Can someone tell me if my trailer is leaning back would I still be able to attach it to the ball hitch. Just bought a new boat and the boat and trailer are leaning back kind of higher then where the hitch would be

Brilliant!! Thanks, worked a treat!

Thank you for this! Got a flat yesterday on my way home and to my surprise, no wheel lock key anywhere. Used Method 1 and got it right off. Why do they even bother with these things? Thank you!

Can you use the PID as a controllerto shut a propane heater on and off ? The light bulb would be the heater turning on and off?

Hey jose! Great videos been following all of them, and they have been very helpful! I've replaced my vro to a regular fuel pump all my lines ect. And Rebuilt my carbs. My main problem was at full throttle i was only getting about 14mph rather than the 30mph i have been in the last couple years.(last year, ran perfect) i'm really hoping the carb rebuild solved this problem. I have yet to throw em back on and test it on the water. just stumbled upon this video about the reeds. Do you think the reeds could have anything to do with my half speed at full throttle problem? Appreciate any feedback and thank you for your time!!

Just found this channel of Boston Whaler 13 awesomeness!

It worked , wow😊

Great video and very helpful. Its pretty similar to my yamaha 20hp 2 stroke and I was able to bring it back to life! My only sugguestion is if anyone doesnt want to wait or pay for 24 gauge copper wire, most ethernet and phone cables are made with 24 guage copper, so if you have some kicking around you can strip that and use it to clean out the jets.

thanks Jose

Very interesting video. Very easy to understand. Thank you

Thank so much looked everywhere for it 🎉

I’ve got the first 2 types you tested for my 130hp Yammy I had no issues using either but I prefer the one’s you tested first because the water comes in both sides.

its works thanks

Dang, I wish you were my neighbor! Thanks for this series! It has been a huge help for my restoration.

I sent a "contact us" email to cannon/stack-on safes, asking for the time interval for maintenance of the door mechanicals. They wanted a video, serial number, etc etc. Geeze people, just answer that simple question you know? Then I got smart and checked RUclips and found your video on my exact safe!! Thank you so much!

Tried and didn´t work

Don’t think I would like that at all..

Can I have the link for the clamp removal tool? Thank you

Great video man!

My safe looks exactly like that one and……… Doesn’t Work! Time for locksmith as I have important paperwork that I don’t feel like damaging by using a cutting disc.

Can you put up another link to the polymer, the current link doesn't work

Great video, thank you!

Good video man. Hope you have saved me a bunch of hassle. Was about to cut my safe open from the back and then reweld it if I could fix it.

It looks like you stripped a phillips screw head moving the latch bracket so you could do that.